WolfKatz Do It Yourself MR2 Turbo Engine Lid Fan Plate

- We sell you the plate, you buy and mount the fans and electronics!
- Works with Both Spal and Tripac / Hayden 10" fans
WARNING - This Plate is not polished. It will have very small surface imperfections that were present when the aluminum was produced. It can be polished out nicely however!

WolfKatz DIY MR2 Turbo Engine Lid Plate Parts List:

So you are wanting to install an engine lid fan kit, but you don't want to spend a fortune to do it! The DIY Engine lid kit is for you!
- Step 1 - Pic you fan type: Tripac / Hayden or Spal
- For fan purchases, we recommend this site: http://www.racerpartswholesale.com as they have great prices do to their high volume!
- If you are in a hurry, Hayden fans are Tripac fans with a different sticker and are available at your local auto parts store.
- Tripac / Hayden fans are reversible
- Tripac 10" Reversible Fan: Part Number 14-4010B1
- Hayden 10" Reversible Fan: Part Number 3670
- Spal 10" Standard Pusher Fan: Part Number VA11-AP8/C-29S Fan (10")
- Step 2 - Buy hardware, Relay and Wire
For Tripac/Hayden fans, here is the parts list (I spent ~$5 at my local hardware store for these parts)
- 8 10-32x 1 1/4" long Round Head Machine Screws
- 8 10-32 nuts
- 8 #10 washers
- 8 #10 lock washers
- 30 amp 12 V relay (most autoparts stores have this if your hardware store does not)
- Misc. 14 gauge wire, plugs for relay
For Spal Fans
- 8 10-32 x 1 1/2" long Round Head Machine Screws
- 8 10-32 nuts

Sorry, PLATE IS DISCONTINUED, THIS INFORMATION IS LEFT UP TO HELP THOSE WHO ALREADY HAVE ONE