home · products · affiliates · search · checkout · contact  
 
  PRODUCTS      

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout

 

 

 

Home » All Other Automotive Parts » All Products

 Checkout
Cadillac Northstar Billet Top Feed Fuel Rail System

Details 

- Replaces your plastic fuel rails with a set of robust aluminum rails
- Reduces fire danger from your aging plastic rails
- Perfect for your custom engine swap or hot rod application
:
Price: $380.00
Out of Stock

Lucas Low Impedance Injector, 14 mm

Details 

Brand New Lucas Racing Low Impedance (Peak and Hold) top feed fuel injectors for use in all WolfKatz Rails (14mm top and bottom O-ring). If your ECU can direct drive low impedance injectors, these are the best choice made. Available in 85 lb/hr, 95 lb/hr, and 110 lb/hr (roughly 850, 950, and 1120 cc/min) flow rates. E85 compatible.
:
Price: $84.00
Out of Stock

Oil Level Sender Plate

Details 

If you have a leaky or otherwise destroyed Oil Level Sender in a 91-95 3S-GTE, you may want to just block it off with this plate instead of spending over $200 for a new sensor!
Price: $45.00
Out of Stock

 
Supra 2JZ-GTE Top Feed Fuel Rail
 
Coming Soon!~ Contact Us for information
Price: $365.00
Out of Stock

WolfKatz DIY MR2 Engine Lid Plate

Details 

WolfKatz Do It Yourself MR2 Turbo Engine Lid Fan Plate

- We sell you the plate, you buy and mount the fans and electronics!
- Works with both Spal and Tripac / Hayden 10" fans
WARNING - This Plate is not polished. It will have very small surface imperfections that were present when the aluminum was produced. It can be polished out nicely however!

Sorry, PLATE IS DISCONTINUED, THIS INFORMATION IS LEFT UP TO HELP THOSE WHO ALREADY HAVE ONE

Price: $0.00
Out of Stock

WolfKatz Lexus / 1UZFE Top Feed Fuel Rails

Details 

If you have a V8 Lexus motor and you want the ultimate in fuel delivery, then these rails are for you!

- Comes with AN-8 Male Fittings
- Compatible with all Domestic and German Fuel injectors
- This Kit is built to order so please expect a 6 to 8 week lead time.


Price: $400.00
Out of Stock

Bosch "ID Style" High Impedance Top Feed Injectors

Details 

If you want high impedance (saturated) injectors and want the most modern style on the planet, look no further. These Bosch injectors will fit all WolfKatz Fuel Rails and come in a variety of flow rates: 775 cc/min, 900 cc/min, 1100 cc/min, and 2150 cc/min. All are E85 compatible. Often called "Injector Dynamics" brand injectors on the open market. WolfKatz secures these same Bosch bodied injectors from a different vendor, but parts essentially interchangeable with the ID brand.
:
Price: $84.00
Out of Stock

 
Supra 1JZ-GTE Top Feed Fuel Rail
 
Coming Soon~ Contact us for information
Price: $365.00
Out of Stock

 

Details 

If you have a V8 Toyota 2UZ family motor and you want the ultimate in fuel delivery, then these rails are for you!

- Comes with AN-8 Male Fittings (-6 or -10 also available)
- Compatible with all Domestic and German Fuel injectors
- This Kit is built to order so please expect a 6 to 8 week lead time.


Price: $400.00
Out of Stock

Aeromotive 13109 Fuel Pressure Regulator

Details 

This is the regulator of choice to match up with your stock fuel pump, supra pump, or walbro pump.

Fittings shown are not included. See our MR2 Fitting Kit for an MR2 / All Trac installation kit!
Price: $167.00
Out of Stock

Bosch Top Feed Fuel Injectors

Details 

The injectors 160 lb/hr or 1700 cc/min injectors are at a huge flow rates for those with gigantic power goals.

These injectors are SPECIAL ORDER ONLY! Please allow 1-3 weeks for delivery.

Price: $125.00
Out of Stock

WolfKatz Injector Clips for Delphi, Siemens, and Bosch Injectors

Details 

These injectors clips work with all domestic and German injectors.

- A must have if your car came with Denso injectors.

- Sold one a at a time (per clip), if you need 4, order a quantity of 4 for example!

Price: $12.00
Out of Stock

Aeromotive 13101 Fuel Pressure Regulator

Details 

Regulator for use with larger fuel pumps like the A1000 from Aeromotive.
Fittings shown not included



SPECIAL ORDER ONLY, PLEASE CONTACT WOLFKATZ PRIOR TO ORDERING FOR AVAILABILITY
Price: $150.00
Out of Stock

Walbro, High Pressure MR2 / All Trac / Supra MKIV Fuel Pump Kit

Details 

This is the in-tank kit that is meant to fit you MR2, All-Trac, or Supra.
Price: $115.00
Out of Stock

Aeromotive A1000 Fuel Pump

Details 

This pump will handle 4 1000 cc/min (96 lb/hr) injectors in boosted applications.



SPECIAL ORDER ONLY, PLEASE CONTACT WOLFKATZ PRIOR TO ORDERING FOR AVAILABILITY
Price: $295.00
Out of Stock

Aeromotive Eliminator Fuel Pump

Details 

If you have large power goals, this is the pump for you!

- Can support over 1200 whp.
Price: $420.00
Out of Stock

SARD Side Feed 800 cc/min Injectors

Details 

These low impedance side feed injectors are great if you want a higher flow rate side feeder for your WolfKatz or MR2 Gen III side feed fuel rail!
Injectors sold as singles. You need 4 for a 3S-GTE or 6 for a Supra!

INJECTORS ARE SPECIAL ORDER ONLY, PLEASE CONTACT WOLFKATZ PRIOR TO ORDERING FOR AVAILABILITY


Price: $130.00
Out of Stock






WOLFKATZ ENGINEERING LLC

TECH@WOLFKATZ.COM


 
home | products | affiliates | search | checkout | contact